KJ Yellow ID Card and how I used Tinkercad

We had to design and make a 3D ID Tag.

We used tinkercad to make our design so we could save it for printing on the 3D printer.

Once it had printed we had to remove the backing.

You can see some backing behind the I and N

Here is my finished ID Tag.  I am going to put it on my keys.


Here is how I made a K design using tinkercad.

this is the base

 here is the letter K

  here is the K on the base

here is the final design

I have made it so the K is on a block with a hole so it can go on my keyring.